|
Drybox and Isolator Glove Systems
|
| These
gloves are primarily used by manufacturing companies
and R&D facilities. Here are the different options
available in Renco's line of Drybox and Isolator
Glove Systems:
•
Material: Drybox and Isolator Gloves are
usually made of HypalonR, Butyl, Latex, Neoprene,
Nitrile, Butadyl, or Polyurethane/VitonR. The
end-user must understand the environment in which
the gloves will be used before determining which
material would be best suited for end use. Please
refer to the Materials pages within this website for
more information on each polymer and also to
chemical/permeation resistance guides.
|
 |
|
| • Port Size:
The port size is the diameter (in inches) of the
circular open end of the glove. For example, a glove
with a port size of 8" will fit a circular port that has
a diameter of 8". Please note that the port size
diameter is not the same measurement as the layflat
length. The layflat length is the length of the cuff
when measured on a flat surface. The standard port sizes
are 6", 8", 10", and 12". Because the polymers will
stretch, many of the gloves will fit ports that are
slightly larger than a given port size diameter.
Circumference measurements should be used when
evaluating gloves for oval ports.
• Glove
Thickness: The standard glove thickness is 15
mil (0.015" / 0.4mm). 30 mil (0.030" / 0.8mm gloves are
also available, as are gloves with other thicknesses.
• Glove
Length: While the standard Drybox and Isolator
Glove length is 32", gloves with lengths of 24", 27",
34"and other lengths may be available.
• Hand
Size: The standard hand sizes available are 8,
9, and 10. Gloves with size 7 or 11 hands are available
for select models.
Hand Orientation:
The standard hand orientation for Drybox
and Isolator Gloves is left/right hand specific i.e. one
glove is dipped for the left hand and the other for the
right hand. Ambidextrous gloves are available for most
models.
|
|
Here is a partial
list of the Drybox and Isolator Gloves
|
Part
Number |
Material
|
Port Size
(inches) |
Thickness
(mils) |
Length
(inches) |
One Piece
Dipped (1) |
Hand Sizes
|
Notes
|
GOS Available (2)
|
B832
|
Butyl |
8
|
15
|
32
|
x
|
8-10, 8A-10A
|
|
|
B3832
|
Butyl |
8
|
30
|
32
|
x
|
8-10, 8A-10A
|
|
|
B1032
|
Butyl |
10
|
15
|
32
|
x
|
8-10, 8A-10A
|
|
|
B632A
|
Butyl |
6
|
15
|
32
|
x
|
8A-10A
|
|
|
B3632A
|
Butyl |
6
|
30
|
32
|
x
|
8A-10A
|
|
|
B4308
|
Butyl |
8
|
15
|
32
|
|
8-10
|
connected sleeve
and glove
|
x
|
B4310
|
Butyl |
10
|
15
|
32
|
|
8-10
|
connected sleeve
and glove
|
x
|
1424H23
|
Neoprene |
8
|
30
|
32
|
x
|
9
|
Operating
temperature range -30 ℃ to 50℃
|
|
1424H24
|
Neoprene |
8
|
30
|
32
|
x
|
10
|
Operating
temperature range -30 ℃ to 50℃
|
|
|
Notes:
1. Unless specified, all gloves are sold by pair. Also,
some gloves are one-piece dipped gloves, while
others are two pieces (one hand-portion glove and
one sleeve) that are either bonded together or
attached with a TitelineR glove-under-sleeve
air/liquid-tight or glove-over-sleeve (GOS)
connector.
2. An additional charge is added for all
glove-over-sleeve (GOS) connectors.
|
|
|
|
|
|
|
|
|
|
|
